Tag: How to Assemble

How to Assemble 4 + 3 Elk Antler Chandelier Cascade Pendant Lights
14Jan

How to Assemble 4 + 3 Elk Antler Chandelier Cascade Pendant Lights

https://buyantlerchandelier.com brings a video tutorial guiding you step by step to assemble 4 + 3 antler chandelier cascade pendant lights candle-style ceiling lights restic lighting fixtures home decor.

Before assembling, check all parts and accessaries are here in correct condition. You will get:
Elk antlers with bulb holders x4
Smaller elk antlers x 3
LED Bulbs x4
Big junction box x1
Small iron box x1
Long bud rod x1
short bud rod x1
Apertured nut x1
Chain with connector x1
Bottom decorative mini antler x1
Light shells x4
Main wire x1
Ceiling mount kit x1
Some nuts and washers

 

1.  Fix the stubby screw in the central hole of the big junction box, screw up it with up and down nuts. Then screw the apertured nut on it.

2. Take down nut and washer from the antler. Thread the wire of the antler through the junction box. Put on the gasket and nut, screw in smoothly.

3. Assemble the rest three antlers in the same way. Adjust every antler’s position, hold it and tighten the screw with a wrench, till it can’t wobble.

4. Thread the main wire through the connecting hub rod. Thread the other end of the wire through the apertured nut in the central of the junction box.Screw the hub rod into the apertured nut, tighten it.

5. Bundle the same color wires together, connect them with the main wire. Fix them with electrical tape.

6. Thread the main wire through the round iron plate. Put it on the wire box. Thread wire through the straight cast. Put it on the iron plate.

7. Get the small iron box, take down the nut from the small antler, then fix it on the box. Adjust the angle, tighten it with wrench. Assemble other two antlers like that.

8. Thread wire through the box, put it on the first tier. Screw it up when nut and washer.

9. Adjust angle, tighten each antler with wrench. Cover the box with the lid.

10. Take down the ring from the chain. Thread wire through it. Screw the ring on the bud rod, tighten it. Connect it with the chain.

11. Put 4pcs light shells on the bulb holders,Screw the four bulbs into the holder.

12. Install the mini antler, tighten it.

13. Now, the assembly is complete. The next step is to hang it from the ceiling.

 

Tips：

Specialized skills is needed to install electrical wiring and ceiling mount.
You’d better wear gloves to assemble the chandelier to avoid getting dirty or injured.
It is a video tutorial for 4 + 3 antler chandelier cascade pendant lights, but it is also applied to most of the other antler chandeliers in our store: https://buyantlerchandelier.com

 

 

 

How to Assemble 6 Cast Antler Chandelier Cascade Rustic Candle-Style Ceiling Lights
28Dec

How to Assemble 6 Cast Antler Chandelier Cascade Rustic Candle-Style Ceiling Lights

How to Assemble 6 Cast Antler Chandelier Cascade Rustic Candle-Style Ceiling Lights

 

Here is a video tutorial to guide you how to assemble a single tier 6 cast antler chandelier cascade rustic candle-style ceiling lights.

Before assembling, take out all the parts and accessories from the box. Check if everything is here in correct condition.

  1. Thread the wire through the junction box.
  2. Put on the gasket and nut, screw in smoothly.
  3. Hold the antler, then tighten the screw with a wrench, till make sure it doesn’t wobble.
  4. Install the rest of five antlers in the same way.
  5. Thread the main wire through the connecting hub rod.
  6. Thread the other end of the wire through the apertured nut in the central of the junction box.
  7. Screw the hub rod into the apertured nut, tighten it.
  8. Bundle same color wires together, connect them with the main wire. Fix them with plastic connector.
  9. Thread the main wire through the round iron plate. Put it on the wire box.
  10. Thread the main wire through the top antler, then put it on the iron plate.
  11. Take down the ring from the chain. Thread wire through it.
  12. Screw the ring on the bud rod, tighten it.
  13. Connect it with the chain.
  14. Screw the six bulbs into the holder.
  15. Install the small antler, tighten it.
    So we’re done.

Tips：
It just a video tutorial for single tier cascade candle-Style deer antler chandelier, but it is also applied to most of the other antler chandeliers in our store: https://buyantlerchandelier.com

How to Assemble 3 Tiers Antler Chandelier - The Most Detailed Video Tutorial
24Dec

How to Assemble 3 Tiers Antler Chandelier – The Most Detailed Video Tutorial

This is a detailed video tutorial to show how to assemble a whitetail deer 3 tiers 20 cast cascade candle-style antler chandelier rustic ceiling lights. In the video, we focus on the steps and details about assembing major structure. But not tell you how to mount to ceiling, how to install the light bulbs or how to connect the chandelier with the electric wires indoor.

1, Assemble the first tier antlers.

  • Thread the wire through the junction box.
  • Put on the gasket and nut, screw in smoothly.
  • Hold the antler, then tighten the screw with a wrench.
  • You can adjust the Angle of antler or lamp holder before tightening finally.
  • Thread the main wire through the connecting rod. Then through the apertured nut.
  • Tighten the bud rod. Don’t screw-in too long to cut the wire.
  • Connect wires based on different colors. Don’t mix them up.
  • Thread the main wire through the center cast. Put it on the first tier.

 

2, Assemble the second tier antlers same as the first one.

  • Put the second on the first tier after threading the main wire through the junction box.
  • Thread the wire through another apertured nut, screw it on the bud rod, tighten it with wrench.
  • Repeat before to complete the assembling of the second tier.

 

3, Assemble the third tier antlers in the same way.

  • Put it on the second tier.
  • You will have to adjusted the bud-rod’ length of the first or second tier if the screw socket is not suitable.
  • Complete the third tier’s assembly as before.

 

4, Assemble the top of the antler chandelier.

  • Fix the three cast antlers on the round iron plate with 3 holes.
  • Thread the main wire through the iron plate.
  • Set the whole part on the bud rod.
  • Thread the main wire through the straight cast, then put it on the top of the chandelier.

 

5, Complete the assembly.

  • Take down the ring from the chain. Thread wire through it.
  • Screw the ring on the bud rod, tighten it.
  • Now, the whole assembly is finished.
  • The next step is to hange the chandelier from the ceiling after installing the light bulbs.

 

Tips：

You may do proper adjustment if you find some antlers or lamp holders is crooked. But don’t be too hard.
It is normal if you find some parts are slidable after assembling.
It just a video tutorial for 3 tiers cascade candle-Style whitetail deer antler chandelier,
but it is also applied to most of the other antler chandeliers in our store: https://buyantlerchandelier.com