How to Install 59 Inch 3 Tiers Cascade Antler Chandelier Rustic Pendant Lighting Fixtures - Video Tutorial

https://buyantlerchandelier.com bring the video tutorial to guide you how to install a 59″ large 24 cast elk deer antler chandelier 12 + 8 + 4 candle-style rustic pendant lighting fixtures for dining room & living room with high ceiling.

Before assembling, check all parts and accessaries are here in correct condition. You will get:

Large size antlers with bulb holders (for the first tier) x 12
Medium size antlers with bulb holders (for the second tier) x 8
Small size antlers with bulb holders (for the third tier) x 4
Long antlers (on top) x 3
Extra small antlers (on the second tier) x 4
LED Bulbs x 24
Big junction box x 1
Medium junction box x 1
Small junction box x 1
Round iron plate x 3
iron bud rod x 3
Apertured nut x 3
straight cast x 3
Chain with connector x 1
Bottom decorative mini antler x1
Light shells x 24
Main wire x 1
Ceiling mount kit x 1
Some nuts and washers

1. Install the first tier of the antler chandelier.

A. Take down nut and washer from the large antler. Thread the wire of the antler through the big junction box. Put on the gasket and nut, screw down.
B. Install the rest 11 antlers in the same way. Adjust every antler’s position, hold it and tighten the screw with a wrench, till it can’t wobble.
C. Fix the stubby screw in the central hole of the big junction box, screw up it with up and down nuts. Then screw the apertured nut on it.
D. Thread the main wire through the connecting hub rod. Thread the other end of the wire through the apertured nut in the central of the junction box. Screw the hub rod into the apertured nut, tighten it.
E. Bundle the same color wires together, connect them with the main wire. Fix them with electrical tape.
F. Thread the main wire through the iron plate. Put it on the big wire box. Thread wire through the straight cast. Put it on the iron plate.

2. Install the second tier of the antler chandelier.

A. There are eight antlers on the second tier. Assemble the second tier antlers same as the first one.
B. Put the second on the first tier after threading the main wire through the medium junction box.
C. Install the apertured nut and bud rod tightly.
D. Bundle all the wires with main wire by color.
E. Install the four extra small antlers on the second small round iron plate. Adjust their angles and screw up.
F. Put the rion plate on the second tier, and then put on the second straight cast to complete the second tier installation.

3. Install the third tier of the antler chandelier.

A. Install the four small antlers on the last junction box as before.
B. Put the third tier on the second one.
B. Install the third nut and bud rod, then bundle the wires, and tighten the joints around with insulating tape.
C. Assemble the rest 3 long antlers on the smallest round iron plate. Adjust the angles and screw down.
D. Put the top part on the third tier.
E. Put the last straight cast on the top tier.

4. Complete the rest installation.

A. Take down the ring from the chain. Thread wire through it. Screw the ring on the bud rod, tighten it up. Connect it with the chain.
B. Put 24pcs light shells on the bulb holders. Screw the 24 LED bulbs into the holders.
C. Install the mini antler when it’s hanging.

After completing the installation process, you need to hang it from the ceiling. It is a chandelier weighing more than 45kg (99lbs). It will take more than an hour to complete the installation.

Tips:

A. Specialized skills is needed to install electrical wiring and ceiling mount.
B. You’d better wear gloves to assemble the chandelier to avoid getting dirty or injured.
C. Please handle it with care after installation. Don’t forget to take down the bottom mini antler if you want to put it on the floor.
D. Considering the large size, the antler may be broken while shipping or installing. But don’t worry, you can glue them together with super glue.

It is a video tutorial for 24 cast three-tired deer antler chandelier pendant lighting rustic fixtures, but it is also applied to most of the other antler chandeliers in our store: https://buyantlerchandelier.com

How to Assemble 3 Tiers Antler Chandelier - The Most Detailed Video Tutorial

This is a detailed video tutorial to show how to assemble a whitetail deer 3 tiers 20 cast cascade candle-style antler chandelier rustic ceiling lights. In the video, we focus on the steps and details about assembing major structure. But not tell you how to mount to ceiling, how to install the light bulbs or how to connect the chandelier with the electric wires indoor.

1, Assemble the first tier antlers.

  • Thread the wire through the junction box.
  • Put on the gasket and nut, screw in smoothly.
  • Hold the antler, then tighten the screw with a wrench.
  • You can adjust the Angle of antler or lamp holder before tightening finally.
  • Thread the main wire through the connecting rod. Then through the apertured nut.
  • Tighten the bud rod. Don’t screw-in too long to cut the wire.
  • Connect wires based on different colors. Don’t mix them up.
  • Thread the main wire through the center cast. Put it on the first tier.

 

2, Assemble the second tier antlers same as the first one.

  • Put the second on the first tier after threading the main wire through the junction box.
  • Thread the wire through another apertured nut, screw it on the bud rod, tighten it with wrench.
  • Repeat before to complete the assembling of the second tier.

 

3, Assemble the third tier antlers in the same way.

  • Put it on the second tier.
  • You will have to adjusted the bud-rod’ length of the first or second tier if the screw socket is not suitable.
  • Complete the third tier’s assembly as before.

 

4, Assemble the top of the antler chandelier.

  • Fix the three cast antlers on the round iron plate with 3 holes.
  • Thread the main wire through the iron plate.
  • Set the whole part on the bud rod.
  • Thread the main wire through the straight cast, then put it on the top of the chandelier.

 

5, Complete the assembly.

  • Take down the ring from the chain. Thread wire through it.
  • Screw the ring on the bud rod, tighten it.
  • Now, the whole assembly is finished.
  • The next step is to hange the chandelier from the ceiling after installing the light bulbs.

 

Tips:

You may do proper adjustment if you find some antlers or lamp holders is crooked. But don’t be too hard.
It is normal if you find some parts are slidable after assembling.
It just a video tutorial for 3 tiers cascade candle-Style whitetail deer antler chandelier,
but it is also applied to most of the other antler chandeliers in our store: https://buyantlerchandelier.com